Concrete Slab Leak Repair Costa Mesa
Sometimes breaking the concrete is the only way to reach the leak. I keep the opening as small as possible and patch the concrete when I'm done.
About Concrete Slab Leak Repair Costa Mesa
Opening the slab is the traditional way to fix a leak. I only recommend this when the leak is isolated and easy to reach, or when rerouting the pipe would cause too much damage to your walls and cabinets.
In most Costa Mesa homes, the concrete slab is about 4 to 6 inches thick. I use a jackhammer to break a small section of the concrete right above the leak. I cut out the damaged section of the copper pipe and braze in a new piece. After the repair passes a pressure test, I fill the hole with new concrete. You will need a Written Estimate before we start because this method requires removing the flooring over the leak.
Frequently Asked Questions
How big of a hole do you have to make?
I usually only need a hole that is about 2 feet by 2 feet, depending on how the pipes are laid out under the concrete.
Do you fix the floor afterward?
I patch the concrete slab, but you will need a flooring contractor to replace your tile, wood, or carpet.
Is it loud?
Yes. Breaking the 4 to 6-inch concrete slab with a jackhammer is very noisy.
Serving Costa Mesa zip codes: 92626, 92627, 92628 and surrounding Orange County areas
Field Diagnostic Guide • Direct Answer
How do you detect a slab leak without tearing up flooring?
Non-invasive slab leak detection uses digital acoustic ground microphones and thermal imaging cameras to pinpoint the ultrasonic hiss and temperature gradient of pressurized pipe leaks through concrete without preliminary jackhammering.